Lohas Metal Flexible Dryer Hose Support For Dog Grooming combines a table-edge clamp, a flexible metal support arm and dual threaded mounting interfaces for configuring auxiliary equipment around a pet grooming station. Built with a manganese steel alloy flexible tube and aluminum alloy fasteners, it supports a maximum dynamic load of 3.5 kg and fits table edges up to 38 mm thick. The adjustable arm helps position compatible dryer-hose holders or grooming accessories near the working area without placing a freestanding support on the floor.
The hand-tightened clamp attaches to the edge of a grooming table, keeping the support anchored at the workstation perimeter. This arrangement leaves the central tabletop available for grooming tasks and avoids the footprint of a separate floor stand. A silicone anti-slip pad sits between the clamp and the table surface, and the clamp accommodates table edges up to 38 mm thick.
The flexible inner tube is made from manganese steel alloy, with aluminum alloy fasteners in the support assembly. The arm can be bent and telescopically extended to adjust the position of compatible mounted equipment around the grooming area. For dryer-related setups, the support arm can be configured with a compatible hose holder or attachment.
The mounting end provides standard 1/4-inch and 3/8-inch threads for compatible accessories. These interfaces allow the support to be configured with suitable mounting hardware rather than being limited to one proprietary connection. Compatibility depends on the accessory's thread specification, mounting arrangement and total assembled weight.
The support arm features a matte dark gray sandblasted surface. Its low-reflection appearance suits grooming stations with task lighting and work areas used for product demonstrations or video recording.
Position a compatible dryer-hose holder near the grooming table so the hose can be supported during coat drying.
Keep a compatible hose attachment positioned while brushing or separating the coat between drying passes.
Adjust the arm position to direct a compatible hose outlet toward different grooming areas.
Use the threaded interface for compatible supplementary equipment, subject to the accessory's mounting requirements and load.
The support arm is the mounting and positioning component of the setup. The type of hose holder, its grip on the hose and its compatibility with a particular dryer depend on the selected attachment.
The support arm uses standard 1/4-inch and 3/8-inch threaded interfaces, giving the assembly two connection sizes for compatible mounting accessories. Configuration depends on the equipment being added and the requirements of the intended grooming setup.
| Configuration Element | Selection Consideration |
|---|---|
| Lighting attachment | Match the mounting thread and the accessory's weight to the support arm. |
| Dryer-hose holder | Select a holder that fits the hose diameter and provides suitable hose retention. |
| Dual-arm splitter | Consider whether two mounting positions are needed and whether the combined load remains within the rated capacity. |
| Cable management clips | Use compatible clips to organize accessory cables around the workstation. |
The dual-arm splitter and cable management clips are listed as optional accessories. Their inclusion in a particular package should be confirmed separately.
A grooming workstation often accommodates several activities within the same tabletop area, including coat drying, brushing, trimming and finishing. The Lohas support arm provides an additional mounting position at the table edge, allowing compatible equipment to be positioned near the active work area.
Its edge-mounted arrangement is particularly relevant when the central tabletop needs to remain available for handling the animal and grooming tools. The arm's bending and telescopic adjustment also allows the mounted accessory position to change as the workstation is rearranged.
The support arm is built around three main configuration elements: a flexible manganese steel alloy inner tube, aluminum alloy fasteners and a table clamp with a silicone anti-slip pad. The matte dark gray sandblasted finish provides a low-reflection appearance suited to grooming work areas.
Zhejiang Lohas Pet Supplies Co., Ltd. reports a certification portfolio that includes UL, FCC, CE, RoHS, PSE, KC and UKCA. Its product range includes pet grooming tables, grooming dryers and table-mounted accessories, including flexible gooseneck support products.
Select a holder that matches the hose diameter, connects to the 1/4-inch or 3/8-inch threaded interface, and keeps the combined load within 3.5 kg.
It fits flat table edges up to 38 mm thick. The silicone anti-slip pad and progressive locking require a stable, flat edge surface for secure mounting.
Add the weight of the mounted accessory, the hose or cable it supports, and any add-ons such as a dual-arm splitter. The combined dynamic load should remain at or below 3.5 kg.
The support arm mounts to the table edge, keeping the floor clear and the tabletop free. A floor stand occupies floor space and may interfere with movement around the grooming station.
Check the clamp, silicone pad, threaded interfaces, and flexible tube periodically. Replace any worn or damaged part and avoid exceeding the rated load or table edge thickness.
Address
Wanming Village, Beibaixiang Town, Yueqing City, Wenzhou City, Zhejiang Province, China
Tel
